 |
 |
 |
|
For larger, heavier pieces, choose the Maxnc-15.
Larger travel axis than the Maxnc-10
Larger/sturdier 4"x6" X-Y and Z blocks and larger/sturdier 2.5" x 16.25" gussets
Accommodates larger spindle motors (1/5 hp or 1/2 hp)
On the Vertical Mills page, check the boxes next to COMPARE for both the Maxnc-10 and the Maxn-15, and then click on COMPARE to see a comparison of the technical specs of both mills.
MAXNC 15CL 4-axis CNC Mill Demo
Finish cut on a hand plane profile
MAXNC 15 TECHNICAL SPECIFICATIONS |
| US | METRIC | Overall Width (X) with 16" X-slide | 21.5" | 546 mm | Overall Depth (Y) | 20.8" | 527 mm | Overall Height (Z) | 21.9" | 556 mm | Weight | 54 lb | 24.5 kg | Dimensional Shipping Weight | 104 lb | 47.2 kg | X Axis Travel, 12" slide | N/A | N/A | X Axis Travel, 16" slide | 10.0" | 254 mm | X Axis Travel, 18" slide | 12.0" | 305 mm | Y Axis Travel | 8.0" | 203 mm | Z Axis Travel | 9.0" | 229 mm | X, Y, Z Slides cross section | 4" x 1" | 102 x 25 mm | X-Y Block dimensions | 4" x 6 " x 1.5" | 102 x 152 x 38 mm | Z Block dimensions | 4" x 6 " x 1.5" | 102 x 152 x 38 mm | Gussets dimensions (bxh) | 2.5" x 16.25" | 64 x 413 mm | Spindle Motor Max RPM (1/5 hp) | 10,000 RPM | 10,000 RPM | Spindle Max RPM (1/5 hp) See RPM Reduction Factor | 4,350 RPM | 4,350 RPM | Spindle Max RPM (1/2 hp) See RPM Reduction Factor | 4,350 RPM | 4,350 RPM | Spindle Max RPM (1/2 hp) See RPM Reduction Factor | 4,350 RPM | 4,350 RPM | Spindle pulley drive system | Timing Belt, Timing Pulleys | Timing Belt, Timing Pulleys | Pulleys Ratio (Spindle / Motor, 1/5 hp motor) Torque Amplification Factor | 2.3 | 2.3 | Pulleys Ratio (Spindle / Motor, 1/2 hp motor) Torque Amplification Factor | 2.3 | 2.3 | Pulleys Ratio (Motor / Spindle, 1/5 hp motor) RPM Reduction Factor | 43% | 43% | Pulleys Ratio (Motor / Spindle, 1/2 hp motor) RPM Reduction Factor | 43% | 43% | Stepper motor current (each axis) | 3 Amp per phase | 3 Amp per phase | Stepper motor bipolar torque (each axis) | 175.0 Oz-In | 1.24 N-m | Stepper motor degree size | 1.8° | 1.8° | Max rapid and feed rate | 60.0 I/min | 1,524 mm/min | Positioning resolution | 0.00025" | 0.0064 mm | Repeatability | 0.001" | 0.0254 mm | Antibacklash nuts in all axes | Standard | Standard | Lead screw diameter | 1/4" | 6.4 mm | Lead screw lead (advance per turn, 20 TPI) | 0.05" | 1.27mm | Frame material | 6061 T6 Aluminum | | Frame finish | MIL-A-8625(1) Type III Class 2 Black anodization | MIL-A-8625(1) Type III Class 2 Black anodization | Input voltage (standard) | 110 v | 110 v | Input voltage (optional) | 220 v | 220 v | | Materials that can be machined in a Maxnc MIll | | Up to mild (low-carbon) steel. Materials with Brinell Hardness of up to 127 (Rockwell B hardness of up to 71) | | Up to mild (low-carbon) steel. Materials with Brinell Hardness of up to 127 (Rockwell B hardness of up to 71) |
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Proprietary Closed-Loop System (CL option) provides durable accuracy and repeatability. Unique system with encoders on all axis to monitor axis position. The control reads the encoders at over 60,000 times a second and the feedback is analyzed by the software. Based on the position of the encoders, the outputs to the motors are advanced, reduced, or modified as needed.
- Spindle ON/OFF and speed control from the software
- Anti-backlash system provides zero backlash on all axes
- Light weight but durable frame and stages made from 6061-T^ aircraft aluminum. Hard anodizing provides exceptional wear resistance.
- Proven slide dovetail construction with adjustable gibbs for long lasting accuracy
- Spindle supplied with ER-16 collets. It can accept optional drill chuck or tool holders.
- Collet range 1/16" to 3/8"
- Spindle motor available in 1/5 hp or 1/2 hp power output.
- Home / Limit switch combination for the positive side of the X, Y, and Z axis (CL only)
- A Socket for optional accessories:
- Socket for the optional MaxCool coolant pump
- 4th Axis capable with the purchase of the optional rotary table. Plug and Play.
“G” & “M” code programming- 0.00025” resolution
- Linear interpolation
- Circular interpolation
- Helical interpolation
- Backlash compensation
- Keyboard jog mode
- Automatic cycle
- Step cycle
- Tool length compensation table
- Scaling
- Screen plot of program and more.
- Includes the MAXNC software package with a mini CAM system for automatic NC program creation from CAD.
- Optional probe for 3d digitizing.
- Optional 4th axis.
- “G” & “M” code programming
- Linear interpolation
- Circular interpolation
- Helical interpolation
- Backlash compensation
- Keyboard jog mode
- Automatic cycle
- Step cycle
- Tool length compensation table
- Scaling
- Screen plot of program and more.
- Includes the MAXNC software package with a mini CAM system for automatic NC program creation from CAD.
- Optional probe for 3d digitizing.
- Optional 4th axis.
|
|
|
|
|
|
|
